Công tắc cảm ứng hiện diện THEBEN PlanoCentro 300-EWH
- Passive infrared presence detector for ceiling installation and flush/surface mounting.
- Square detection area 360º (up to 100 m²) for accurate and easy planning.
- Automatic presence- and brightness-dependent control for lighting.
- Flat design with exchangeable cover frame in a range of shapes and colours.
- Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs.
- 3 light channels.
- Ideal for classrooms with two lighting groups switched according to daylight each with their own light measurement as well as presence-dependent controlled blackboard lighting.
- Channels A, B, C, light: relay, 230V.
- Zero cross switching.
- Choice of fully or semi-automatic operation.
- Connection option for push button or switches for manual switching with automatic recognition of push button/switch.
- 6 defined basic parameter settings directly on device.
- Adjustable sensitivity.
- Can be configured remotely and selection of set parameters.
- SendoPro management remote control (optional).
- theSenda S user remote control (optional).
Đặc tính kỹ thuật
| Model | PlanoCentro 300-EWH |
| Operating voltage | 230 VAC ± 10% |
| Frequency | 50Hz |
| Installation height | 2,5 – 3,5m |
| Installation type | Flush/surface mounting (UWH) or ceiling mounting with mounting frame (EWH) |
| Power consumption | ~1W |
| Light measurement | Mixed light measurement |
| Setting range brightness | 10 – 2000 lx |
| Light switch-off delay | 10sec-60 min |
| Type of contact light | Relay 230V/10A |
| Lamps | Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs |
| Incandescent/ halogen lamp load | 2300W (total of all contacts) |
| Compact and flourescent lamps | 1150 VA (cos φ = 0,5) |
| Compact and flourescent lamps (Number of electronic ballasts) | 20 x 54/58 W, 25 x 35/36 W, 10 x 2 x 54/58 W, 15 x 2 x 35/36 W |
| LED lamp < 2 W | 60W |
| LED lamp 2-8 W | 180W |
| LED lamp > 8 W | 200W |
| Type of connection | Spring terminals |
| Ambient temperature | +0 °C … +50 °C |
| Protection class | II according to EN 60 730-1 |
| Type of protection | IP40 (when fitted) |
| Conformity to type CE | This device complies with the protection regulations of the EMC directives 2014/30/EU and of the Low Voltage directive 2014/35/EU. |
- Hãng sản xuất THEBEN của Đức.
.png)
.png)
