.jpg)
.jpg)
(1).png)
.jpg)
(1).jpg)
.jpg)
(1).jpg)
.jpg)
.jpg)
(1).jpg)
Công tắc cảm ứng ánh sáng THEBEN LUNA 122 top2 RC EL
- Twilight switch with integrated weekly timer.
- External light sensor included in delivery.
- Variable lux values can be set for each day, for each day of the week.
- Fixed ON and OFF times (e.g. nighttime interruption).
- Can be programmed independent of brightness.
- 2 special programmes with yearly function (e.g. 24.12.2007 to 6.01.2008): Variable lux values and switching times can be set for each special program.
- DCF77 radio controlled via external antenna.
- 2 channels
- Foliday and public holiday program with yearly function; for fixed and Easter-dependent public holidays.
- Different summer/winter time rules can be selected or freely defined.
- Channel-independent operaing hours counter.
- 2 external contol inputs.
- Switching brightness digitally adjustable.
- Adjustable On and Off switching delay to avoid switching errors caused by lightninh, car headlights etc. Preset 1 minute.
- Switching brightness and switching delay can be set separately for switching On and Off.
- Onscreen display of channel and switching status as well as current lux value.
- DuoFix spring terminals, for 2 conductors per connection terminal.
- Zero-cross switching for relay-saving switching and high lamp loads (not with 24 V devices).
- Up to 4 sensors can be attached.
- Up to 10 devices can be connected to a digital sensor.
- Interface for OBELISK top2 memory card (PC programming).
- Copying programs.
- Storing programs.
- External light sensor included in delivery.
- Extended brightness range.
- Permanent switching ON/OFF.
- Test function.
- (Permanent ON) to check the installation independently of set brightness value.
- Switching preselection.
- Display back light (can be turned off).
- PIN coding.
- External input for switches or buttons.
- Operating hour counter with reminder function.
Đặc tính kỹ thuật
| Model | LUNA 122 top2 RC EL |
| Operating voltage | 100 – 240 VAC |
| Frequency | 50 – 60 Hz |
| Number of channels | 2 |
| Number of memory locations | 84 |
| External inputs | 2 |
| Stand-by consumption | ~1,3W |
| Capacity loss max. | 2,2W |
| Program | Weekly program |
| Additional program | Extra/Holiday program |
| Time basis | Quartz /DCF77 |
| Setting range brightness | 1 – 99000 lx |
| Preset brightness value | 15 lx |
| Switch-on delay | 0 – 59 min |
| Switch-off delay | 0 – 59 min |
| Type of contact | Changeover contact |
| Switching output | Potential-free, not for SELV |
| Width | 3 modules |
| Installation type | DIN rail |
| Type of connection | DuoFix spring terminals |
| Keyboards | 4 touch buttons |
| Shortest switching times | 1 min |
| Power reserve | 10 years at 20°C |
| Switching capacity | 16 A (at 250 V AC, cos φ = 1), 10 A (at 250 V AC, cos φ = 0.6), 10 AX (Fluorescent lamp load) |
| Switching capacity min. | ca. 10 mA |
| Incandescent lamp load | 2600 W |
| Halogen lamp load | 2600 W |
| Fluorescent lamp load (conventional) not corrected | 2300 VA |
| Fluorescent lamp load (conventional) series-corrected | 2300 VA |
| Fluorescent lamp load (conventional) lead-lag circuit | 2300 VA |
| Fluorescent lamp load (conventional) parallel-corrected | 800 VA 80 µF |
| LED lamp < 2 W | 30W |
| LED lamp 2-8 W | 100W |
| LED lamp > 8 W | 120W |
| Energy saving lamps | 170W |
| Fluorescent lamp load (electronic ballast) | 650W |
| Test approval | VDE |
| Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
| Ambient temperature | -30°C … +55°C |
| Type of protection | IP 20, sensor IP 66 (Front) | IP 40 (Back) |
| Protection class | II, Sensor III |
| Max. cable length to sensor | 100m |
- Hãng sản xuất THEBEN của Đức.
.png)
.png)
