Công tắc cảm ứng ánh sáng THEBEN LUNA 120 top2 AL
Features
1. Channel
- Twilight switch with integrated weekly timer.
- External light sensor included in delivery.
- Analogue adjustable switching brightness.
- Adjustable On and Off switching delay to avoid switching errors caused by lightning, car headlights etc. Preset 1 minute.
- Switching brightness and switching delay can be set separately for switching On and Off.
- Fixed ON and OFF times (e.g. nighttime interruption).
- can be programmed independent of brightness.
- Onscreen display of channel and switching status.
- DuoFix spring terminals for 2 conductors per connection terminal.
- Zero-cross switching for relay-saving switching and high lamp loads.
- Interface for OBELISK top2 memory card (PC programming).
2. Insertable switching program
- Copying programs.
- Storing programs.
- Holiday program with yearly function.
- Different summer/winter time rules can be selected or freely defined.
- Permanent switching ON/OFF.
- Test function.
- (Permanent ON) to check the installation independently of set brightness value.
- Switching preselection.
- Display back light (can be turned off)
- PIN coding.
- Operating hours counter (with reminder function).
Specifications
| Model | LUNA 120 top2 AL |
| Operating voltage | 220 – 240 VAC |
| Frequency | 50 – 60 Hz |
| Number of channels | 1 |
| Number of memory locations | 56 |
| Stand-by consumption | ~1,3W |
| Capacity loss max. | 1,7W |
| Program | Weekly program |
| Additional program | Holiday program |
| Time basis | Quartz |
| Setting range brightness | 2 – 2000 lx |
| Switch-on delay | 0 – 59 min |
| Switch-off delay | 0 – 59 min |
| Type of contact | Changeover contact |
| Switching output | Potential-free, not for SELV |
| Width | 3 modules |
| Installation type | DIN rail |
| Type of connection | DuoFix spring terminals |
| Keyboards | 4 touch buttons, 1 potentiometer |
| Shortest switching times | 1 min |
| Power reserve | 10 years at 20°C |
| Switching capacity | 16 A (at 250 V AC, cos φ = 1), 10 A (at 250 V AC, cos φ = 0.6), 10 AX (Fluorescent lamp load) |
| Switching capacity min. | |
| Incandescent lamp load | 2600 W |
| Halogen lamp load | 2600 W |
| Fluorescent lamp load (conventional) not corrected | 2300 VA |
| Fluorescent lamp load (conventional) series-corrected | 2300 VA |
| Fluorescent lamp load (conventional) lead-lag circuit | 2300 VA |
| Fluorescent lamp load (conventional) parallel-corrected | 800 VA 80 µF |
| LED lamp < 2 W | 30W |
| LED lamp 2-8 W | 100W |
| LED lamp > 8 W | 120W |
| Energy saving lamps | 170W |
| Fluorescent lamp load (electronic ballast) | 650W |
| Test approval | VDE |
| Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
| Ambient temperature | -30°C … +55°C |
| Type of protection | IP 20, sensor IP 55 |
| Protection class | II, Sensor III |
| Max. cable length to sensor | 100m |
- Hãng sản xuất THEBEN của Đức.
.png)
.png)
