- PVW-12TE is a sensor speaker which detects passive infrared emitted from human beings and sound two different messages depending on the day light or control input settings.

- Suitable for indoor and outdoor use

+ Designed to be rainproof, PVW-12TE can be used outside.

+ It is equipped with AND detection system which will offer more reliable protection.

+ AND detection system will issue an alarm signal only when detection occurs in both horizontal and downward zones simultaneously.

- Two recordable messages / Dual control (daylight or ARM/DISARM settings)

+ The unit can record two different messages (Max. 8sec. each).

+ At detection, it will trigger one of the messages depending on the day light or control input (ARM/DISARM) settings.

+ Day light control: Night:Message 1 , Day:Message 2.

+ External input control: ARM: Message 1, DISARM:Message 2.

- Two recording methods available: Message can be recorded through built-in microphone or jack input which fits to external equipments such as tape recorders or personal computers.

- Replay time adjustable: Replay time of messages is adjustable between 2sec. and 5min.

Specification

Product name	Sensor speaker (For indoor/outdoor use)
Model	PVW-12TE
Detection system	Passive infrared
Coverage	Horizontal coverage Max. detection distance: 40' (12m) Horizontal detection zone: 7 zones Detection angle: 90degrees Downward detection zone: 7 zones
Adjustment range	Horizontal: +/-90degrees(+/-3degrees of fine adjustment is available) Detection distance: 10' to 40' (3 to 12m) (By adjusting vertical angle of downward curtain)
Supply voltage	10 to 30VDC (Non polarity)
Current consumption	55mA MAX. for standby 300mA MAX. for operation (When Max. volume)
ARM/DISARM input	N.O./N.C. selectable with a switch N.O.: Armed when closed N.C.: Armed when opened Response time: 300msec or longer Input resistance: 1kΩ; or less
Replay input	N.O./N.C. selectable with a switch N.O.: Armed when closed N.C.: Armed when opened Response time: 300msec or longer Input resistance: 1kΩ or less
Day light control	Recognized as night when the illuminance of the surrounding area is lower than the set illuminance.
Contact output	Dry contact relay output N.O./N.C. selectable with a switch Contact capacity: 30V (AC/DC), 0.5A MAX. Contact operation: One shot operation Approx. 2sec.
Sound output	Replay the two different messages through the built-in speaker Operation: off delay operation Repeat sounds during detection time + Approx. 2sec. to 5min. Output sounds: [Message 1] and [Message 2] (Max. 8sec. each) Sound volume adjustment: 80dB Max. Recording method: Built-in microphone or Jack input
Operation LED	Red LED Blinks for warming-up - LED can be disabled with a switch. Lights for detection - LED can be disabled with a switch. Fast blinks for recording standby Lights for recording (Max. 8sec.)
Tamper output	Dry contact relay output: NC Capacity: 30V (AC/DC), 0.5A MAX.
Pulse count settings	Once/Three times (Selectable with a switch)
Sensitivity adjustment	30% to 170% (By potentiometer)
Connection	Terminals
Ambient temperature	- 4F to + 122F (- 20C to + 50C)
Mounting position	Indoor / Outdoor (Rain-proof)
Weight	16.8 oz (480g)
Appearance	Body: AES resin Lens: PE resin