+ Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.

+ This increases the reliability in the outdoor security system.

- Quad High Power Beam

+ The beam power is 100 times of the minimum requirement.

+ The beam distance is 10 times of the described specification.

+ This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

- Ecology: RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Insect/Water Prevent: IP65 rated, with anti-insect bushing and special wading.

- Anti-Bird Spike: Keeps birds and small animals away from the sensor, helping to reduce false alarms.

- Drip-Proof Housing: Prevents rain and snow from streaming down the front side of housing, helping to avoid false alarm.

- Dual Ring Sight: Enables better and clear view for easy beam alignment.

- Target Color

+ The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.

+ The color differs between a transmitter and a receiver which helps easy installation and checking.

- Increased Range Adjustment Allowance

+ Vertically ±20°compared with previous version.

+ It may adapt to the slope installation flexibly.

- Wireless Alignment Checker: Enables easy and accurate beam alignment.(Sold separately).

- Lightning Protection

+ Minimizes the damage caused by induced lightning through wiring.

+ Rated up to 10,000V under normal mode and 15,000V under common mode.

Specification

Model	PXB-100ATC
Detection system	Near infrared pulsed beam interruption system (Anti-crawling, Anti-corrosion)
Infrared beam	Double modulation pulsed beam by LED
Protection distance	Outdoor 330' (100m) or less
Response time	AT output : 0.05sec by upper/lower level simultaneous interruption 0.1/0.2/0.3/0.5sec by either level interruption HF output : 0.05sec by upper/lower level simultaneous interruption
Power supply	12 to 30V DC (Non-polarity)
Current consumption	Transmitter: 27mA Receiver: 48mA
Alarm output	Dry contact relay output N.O./N.C. selectable Contact action: Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistor
Environmental output	Dry contact relay output N.O./N.C. selectable Action: Activated when weather condition gets worse (Min.5sec.) Contact capacity: 30V (AC/DC) 0.25A (resistive load) Protective resistor
Tamper output	Dry contact (N.C.) Action: Activated when cover is detached Contact capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor
Alarm LED	Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED	Red LED (Receiver) ON: when beam is attenuated
Ambient temperature range	-31ﾟF to +151ﾟF(-35 to +66℃)
Beam adjustment	Horizontal: ±90°, Vertical: ± 20°
Functions	Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker
Mounting positions	Outdoor, Indoor
IP rating	65
Wiring	Terminals
Weight	Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
Appearance	PC resin (wine red)