BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad

BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad
3514

QUAN ĐIỂM TRONG KINH DOANH

SẢN PHẨM TỐT - GIÁ CẠNH TRANH - DỊCH VỤ HOÀN HẢO.

Quý khách chỉ thanh toán khi cảm thấy hài lòng sản phẩm & dịch vụ của Công Ty Viễn Thông Thành Phố cung cấp

TOÀN THỂ NHÂN VIÊN CÔNG TY VIỄN THÔNG THÀNH PHỐ LUÔN LUÔN LẮNG NGHE & PHỤC VỤ KHÁCH HÀNG TỐT NHẤT.

1,617,000 VND (Chưa bao gồm VAT)

Thông tin kỹ thuật

Thông tin chi tiết

BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad
-       Bàn phím FMR-7033 với màn hình LCD hiển thị 02 dòng x 32 ký tự, có chức năng điều khiển và thông báo từ xa dùng cho hệ thống báo cháy FPD-7024. Chức năng của FMR-7033 tương tự như chức năng của Bảng điều khiển trên bộ báo cháy trung tâm FPD-7024. Có thể kết nối đến 04 bàn phím FMR-7033 với bộ báo cháy trung tâm FPD-7024.
-       FMR-7033 thực hiện các chức năng như: Kiểm tra hệ thống nội bộ, lập trình hệ thống, điều khiển hệ thống, xem các tường thuật của hệ thống…
-       Chức năng bảo vệ bằng mã số truy cập.
-       Compatible with the FPD‑7024 FACP
-       Two‑line, 32‑character, alphanumeric LCD display
-       Status LEDs identify alarm, trouble, supervisory, and silenced conditions
-       Address setting by jumper
-       Remotely control system commands and programming
-       Passcode protection controls system access
-       Low profile design.
The FMR7033 LCD Keypad combines remote annunciator and controller functions for fire alarm systems controlled by the FPD7024 Fire Alarm Control Panel (FACP). It operates identically to the user interface on the FPD7024 FACP. You can connect up to four FMR7033 keypads to an FPD7024.
The FMR7033 allows remotely starting local system tests, system programming, system control, and viewing the system's event log. Passcode protect access to system functions allowing installation in areas open to the general public.
The twoline, 32character LCD (liquidcrystal display) annunciates system status and events. The top line provides general system status information, while the bottom line identifies specific devices or instructions. An internal sounder signals alarm, supervisory, and trouble conditions and annunciates keystrokes during programming and control procedures. Four status LEDs indicate supervisory, alarm, trouble, and silenced conditions. A pullout slide with operating instructions
fits behind the mounting base.
 
Specifications
Dimensions (HxWxD) 4.6 in. x 6.3 in. x 1.2 in. (12 cm x 16 cm x 3 cm)
Environment Indoor, dry
Relative Humidity Up to 95%, non‑condensing
Temperature (Operating) +32°F to +122°F (0°C to +50°C)
Current (alarm): 100 mA
Current (standby) 80 mA
Voltage (operating) 12 VDC nominal

Sản phẩm cùng thương hiệu